Posts Tagged ‘TaylorMade RBZ Stage 2 Driver’

TaylorMade R11S driver versus RBZ Stage 2 Driver Review

The 460cc TaylorMade R11S driver – available in three lofts, 9-, 10.5- and 12-degrees for right-handers – features a 3-degree Flight Control Technology (FCT) sleeve and annew 5-way adjustable sole plate (ASP) creating a golfer’s preferred set-up as they look down at the club at address.

The R11S is a golfer’s dream come true. ASP technology – a raised five-point plate which can be rotated and secured – allows the golfer to adjust face angle independent of loft setting which means the face angle can be adjusted independently to the loft and vice versa – neutral, slightly open, open, slightly closed and closed.

YouTube Preview Image

TaylorMade RBZ Stage 2 Driver is the new crown alignment decals. Combining the new 4,100mm black clubface, the new decals have been developed in accordance with Dr. Steve Hitzeman, Professor of Sports Optometry. Using their own MAT-T (Motion Analysis Technology by TaylorMade) system, TaylorMade engineers carefully positioned the layout of the new decals to create effective visual cues for alignment.

The sleeve has been updated to adjust to 12 positions within the window of 1.5 degrees of loft adjustment. The driver is available in either a 9.5, 10.5 or 13 degree model, and with the Loft Sleeve Technology, offers up to 60 yards of side to side adjustability. They found that a lower, further forward CG promotes a faster ball speed along with a higher launch, perfect for more distance.

All together the RBZ Stage 2 weighes under 300g. Combine that a slightly higher swing weight, and the design of the club, and the RBZ Stage 2 works to create a moderate draw bias.

Laird is first to win with RocketBallz Stage 2 Driver

With his two-shot victory at the Valero Texas Open, Martin Laird became the first golfer to win on the PGA Tour using TaylorMade RBZ Stage 2 Driver.

Stage 2 usage on the PGA Tour could exceed that of R1. The center of gravity has been moved lower and forward, and the entire clubhead is more aerodynamic this year. It looks different. It looks powerful. The stock shaft is the 50-gram Fujikura RocketFuel, and TaylorMade confirms that this light shaft, combined with the mass properties of the driver, will create a moderate draw bias for consumers.

YouTube Preview Image

Optimizing performance through adjustability is a huge theme with the TaylorMade R1 Driver. The torque wrench, used to make adjustments, is quickly becoming a staple in the golf bag. There is no loft number stamped on the clubhead. That’s because every R1 driver can be adjusted for loft between 8.5 and 12.5 degrees. The R1 also has seven face angle positions. It’s a huge deal that the driver allows loft and face angle to be adjusted independently of one another. Lie angle also can be changed.

RBZ Stage 2 driver is the new crown alignment decals. Combining the new 4,100mm black clubface, the new decals have been developed in accordance with Dr. Steve Hitzeman, Professor of Sports Optometry. Using their own MAT-T (Motion Analysis Technology by TaylorMade) system, TaylorMade engineers carefully positioned the layout of the new decals to create effective visual cues for alignment.

Whilst the design of the crown may demand a lot of attention, inside the crown TaylorMade made even more upgrades. The crown thickness now varies from 0.6mm to 0.4mm (previously a consistent 0.6mm on the R11S and RocketBallz Tour drivers). This process saved three grams of weight, making the clubhead even faster through impact.

Combine that a slightly higher swing weight, and the design of the club, and the RBZ Stage 2 driver australia works to create a moderate draw bias.

Have you Heard of TaylorMade RBZ Stage 2 Driver?

Honestly, I heard a lot about TaylorMade RBZ Stage 2 Driver. I hit the ball straighter and further then I ever have before. It’s the best driver ive ever had bar none. It gives you a big, confidence-building clubface in a head engineered to promote fast swing speed.

It incorporates a CG location that’s lower and more forward than the first-generation Taylormade RBZ driver, and it also includes TaylorMade’s Inverted Cone Technology in which an inverted cone is milled into the inner side of the clubface to expand the sweet spot and help improve the result of off-center hits.

YouTube Preview Image

The head is white with a black face, like several other modern TaylorMade models, but the crown has black, gold and gray graphics even more complex than the gray and orange graphics on the TaylorMade R1 Driver. To create these graphics, TaylorMade used its MAT-T System to study how most golfers look down at their drivers and fairway clubs, and used a computer program to design the graphics to serve as an alignment aid.

Whilst the design of the crown may demand a lot of attention, inside the crown TaylorMade made even more upgrades. The crown thickness now varies from 0.6mm to 0.4mm (previously a consistent 0.6mm on the taylormade r11s driverand RocketBallz Tour drivers). This process saved three grams of weight, making the clubhead even faster through impact. This driver definitely gives you more distance when you hit the ball on the screws.

There was definitely an adjustment period for me though; the club length is longer than my last, and took some getting used to. Be sure you’re good with the club length and this one will be a good fit.

TaylorMade R1 Driver VS. TaylorMade RBZ Stage 2 Driver

TaylorMade follows up its highly successful R11S Driver with the Taylormade R1 driver for sale – perhaps the most adjustable driver ever released. Can you make the settings help your game?

Hoping to continue with the fantastic success of the Rocketballz driver TaylorMade has released the Rocketballz Stage 2 driver. TaylorMade has taken some of the adjustable technology and crown graphics that they offered in the groundbreaking R1 driver and they added speed providing a driver with more control and distance.

YouTube Preview Image

The cheap TaylorMade RBZ Stage 2 Driver is not as adjustable as the R1 because the golfer cannot change the face angle or the weighting of the clubhead. This means when the golfer desires a lower loft they must accept that the face will be opened in the process. So if you are using a 9.5 degree driver and change the loft sleeve to 8 degrees the club will be lower loft and will also have a fade bias that is introduced.

Conversely if you want to increase the loft to 11 degrees the clubhead will have have a draw bias introduced. The loft sleeve offers 7 standard and 5 upright loft options. With the R1 a golfer can lower the loft and in addition close the clubface to compensate for the face being opened by the lowering of the loft. Still the ability to change the loft and ball flight bias is a nice technology addition to the Stage 2 driver.

As with the R1 driver TaylorMade is one of the first to introduce crown graphics to the clubhead to aid with alignment of the clubhead at address. This combined with the black clubface and non-glare white clubhead make the club very easy to align. TaylorMade outfitted the RBZ Stage 2 with an ultra-light Fujikura RocketFuel 50 gram graphite shaft to promote faster swing speeds.

Though not as adjustable as TaylorMade’s flagship R1 driver, the RBZ Stage 2 has been updated to offer 12 different lofts, lie angles and face angles within the window of a 1.5-degree loft adjustment. It also includes a Thick-thin Crown design in which various portions of the crown range from 0.6 to 0.4 millimeter thick, saving three grams of weight as compared to the crowns of the 2012 Taylormade R11S driver and RocketBallz Tour drivers.

The head is white with a black face, like several other modern TaylorMade models, but the crown has black, gold and gray graphics even more complex than the gray and orange graphics on the R1 driver. To create these graphics, TaylorMade used its MAT-T (Motion Analysis Technology by TaylorMade) System to study how most golfers look down at their drivers and fairway clubs, and used a computer program to design the graphics to serve as an alignment aid.

Tweakable and Adjustable TaylorMade R11s Driver

I am a 12 handicap and drive 230-260 depending upon the day. This TaylorMade R11s Driver is the best TaylorMade driver I ever bought. Right out of the box the golfer can fool arounnd with the loft and lie adjustment (Standard or upright) and to some extent “Fine Tune” his purchase.

The R11s allows the golfer to adjust the “effective”loft of the driver plus or minus one and one half percent either way .So a 10.5 driver can be “tuned” by the user to play between 9 and 11.5 degrees. This is done by adjusting the face angle open or closed . Although not really a true loft adjustment, it works OK.

Next comes the shaft. The stock shaft on the R11s is a pretty good stock shaft. No better or worse than the stock shaft on the competition. Where a player can really fine tune the club (or any driver) is by going to a clubfitter and getting fit for a premium shaft. Again most golfers are never going to do this. So off the rack the R11s is as good a driver for the average golfer as there is on the market. There’s a reason Taylor Made owns the market in this regard.

YouTube Preview Image

This R11S Driver is quite easy to hit, very forgiving and hits long. The driver can be adjusted to change the loft and even compensate slightly for a consistent hook or slice in your shot. The driver is super light and allows you to generate tremendous speed to the club head. The R11s is the successor to Taylor Made’s less forgiving R11 and the precursor to the subsequent RBZ, TaylorMade RBZ Stage 2 Driver, R1, R1 Black and the most recent SLDR.

The USGA put limits on what manufacturers could do with driver heads so there really has been no major technological advances in driver heads for several years. So when a golfer or manufacturer tells you their new club is 10-20 yards longer, be suspect. What Taylor made did several years ago was introduce “adjustable” drivers. The competition pooh poohed the idea but now virtually all are following suit. Start with the understanding that the majority of golfers play too low a loft.

In my mind there is little real change in techology for all but the better golfers but the average golfer can get the top of the line TaylorMade driver. I really liked this r11s driver. I was able to ‘tweak’ it for my swing.

More info in http://www.golfwholesaleaus.com/

Golfer’s view at address of TaylorMade RBZ Stage 2 Driver

In 2013, the TaylorMade company launched their new generation: TaylorMade RBZ Stage 2 Driver. It is my belief that the success of the Rocketballz driver surprised TaylorMade.

RBZ Stage 2 driver has a large address footprint, but the new version’s clubface is deeper and larger than the original. Yet, TaylorMade says, the clubhead design overall is more aerodynamic, helping increase clubhead speed. Clubhead speed also gets a boost relative to the Taylormade RBZ driver from a longer, lighter (50 grams) Fujikura RocketFuel shaft, plus a light grip. Despite that large-footprint clubhead, the shaft and grip help keep the overal weight of the RBZ Stage 2 driver below 300 grams.

Something else new about the clubhead: those graphics. The RBZ Stage 2 uses the white, non-glare finish that TaylorMade has employed in some drivers since 2011, but with new crown graphics. The crown decal adds linear references for the golfer’s eye that, TaylorMade says, provide visual cues that help with alignment.

YouTube Preview Image

Though not as adjustable as TaylorMade R1 driver, the RBZ Stage 2 has been updated to offer 12 different lofts, lie angles and face angles within the window of a 1.5-degree loft adjustment. The new clubface is even larger and deeper, encompassing 4,100 square millimeters. This, the company says, makes the Stage 2 even easier to hit for golfers of every skill level.

TaylorMade’s “Loft-Sleeve Technology” (they used to call it “Flight Control Technology”) is incorporated in the RBZ Stage 2 driver, and it gives golfers the ability to adjust loft angle, lie angle and face angle. Other design characteristics of the clubhead and overall club promote a moderate draw bias.

It also includes a Thick-thin Crown design in which various portions of the crown range from 0.6 to 0.4 millimeter thick, saving three grams of weight as compared to the crowns of the 2012 discount r11s driver and RocketBallz Tour drivers. That, along with balancing the club to a slightly higher swing weight, allows the RBZ Stage 2 driver to promote faster swing speed for most golfers. And the lightweight characteristics of the shaft coupled with the head’s mass properties work together to create a moderate draw bias.

All these elements, plus a center of gravity position that is low but more forward, add up to nine more yards for better players compared to the distance performance of the original RBZ driver.

2013 Pga Merchandise Show Coming To Orlando

The cheap TaylorMade RBZ Stage 2 Driver uses improved SuperFast technology, making them even lighter, meaning perfect swing it faster and harder for extra distance! SuperFast distance technologies have been popular that more than 50 professionals put the Burner SuperFast in use the PGA Tour alone in 2010 and the driver was deployed in 14 victories worldwide, especially the FedEx Cup TOUR Championship!

TaylorMade also believes the actual color combo inspires player confidence by developing the club head look larger than its actual size. Of course, the adjustability of this TaylorMade R11S driver isn’t its only design include. It just seems to me that tend to be many an awful lot of things to fiddle with on the taylormade r11s driver for sale – you can adjust the hosel sleeve, the moveable weight cartridges, and the sole meal. How in the world does anyone get all those different adjustments “right?” I’d probably become a head case trying.

With place markers, the knitting pattern can be very fun to do, hence common history. Place markers can an individual how many purls or knits a person just set up. Because there is a number of rbz stitches per each row, place holders would be of help.

Thanks to this new breed of titanium, the CB4 is capable of doing things with multiple levels of variable face thickness and cup-face technology that the responsibility of of house player can measurably improve rebound noteworthy characteristics.  Tour Edge calls it the “Boomerang” consequence.  In a nutshell, it allows Tour Edge to complete a club with thinner walls and an expensive rebound rate on every area of the clubface.   The particular end, it maximizes spring-like effect from more places on the clubface, therefore TaylorMade SpeedBlade Irons are more forgiving on off-center hits and giving well struck shots improved feel.

I named above that this club feels right to my opinion. With the 60 gram shaft still feels like there continues to power typically the head. The feel on center hits is genuinely pleasing to me while you can do tell in case you hit this center. It does not feel awful, but you’re able to identify your own hit it on deal with by the feeling.

Take Adjustable TaylorMade RBZ Stage 2 Driver for a spin

I replaced my RocketBallz 10.5° driver with this TaylorMade RBZ Stage 2 Driver, looking for a lower trajectory and maybe some roll on the very soft fairways on my home course where I play every day. I chose the 9.5° version with M-flex shaft.

I am not only getting the lower trajectory I wanted, but the ball is flying off the face better than any driver I have used. I have added 20 to 40 yards to my drives depending on whether I get any roll or not. Several of my playing partners have commented on the new me, and I know they have begun shopping for this club.

The head is white with a black face, like several other modern TaylorMade models, but the crown has black, gold and gray graphics even more complex than the gray and orange graphics on the TaylorMade R1 Driver for sale. To create these graphics, TaylorMade used its MAT-T (Motion Analysis Technology by TaylorMade) System to study how most golfers look down at their drivers and fairway clubs, and used a computer program to design the graphics to serve as an alignment aid.

YouTube Preview Image

The RBZ Stage 2 driver is not as adjustable as the R1 because the golfer cannot change the face angle or the weighting of the clubhead. This means when the golfer desires a lower loft they must accept that the face will be opened in the process. So if you are using a 9.5 degree driver and change the loft sleeve to 8 degrees the club will be lower loft and will also have a fade bias that is introduced.

It also includes a Thick-thin Crown design in which various portions of the crown range from 0.6 to 0.4 millimeter thick, saving three grams of weight as compared to the crowns of the 2012 taylormade r11s driver for sale and RocketBallz Tour drivers. The new clubface is even larger and deeper, encompassing 4,100 square millimeters. This, the company says, makes the Stage 2 even easier to hit for golfers of every skill level.

I found this feature extremely successful because I could easily set the loft to 8.5 which opened the face a bit more and let me hit this incredibly consistent fade. Being able to review the R1 I found that I was about even in distance but more consistent hitting a fade that would find the fairway with the Stage 2 driver. This was a big plus for me in my scoring.

The sound of the clubhead was muted and very nicely done. This is another big improvement over the original cheap golf clubs which is overly loud in my opinion. I think TaylorMade has made some great improvements when it comes to sound with their recent drivers. The crown graphics on the Stage 2 driver are not nearly as bright as on the R1 driver.

In conclusion, with the release of the Stage 2 RBZ line TaylorMade is looking to continue upon that success with a better-ier club. I think TaylorMade did a great job taking some of the feedback from the original Rocketballz driver and working them into the Stage 2 club.

TaylorMade Launches RocketBallzStage 2 and R1 drivers

TaylorMade is making lots of noise in the driver category. Much of that is coming from the new TaylorMade RBZ Stage 2 Driver. TaylorMade’s other new driver is called the R1 and can be adjusted 168 different ways.

Company technicians moved the Center of Gravity (CG) lower and more forward in this driver model to promote faster ball speed and a higher launch angle for greater distance. Also, they said that they designed a more aerodynamic head for the RBZ Stage 2 and expanded the clubface to 4,100 square millimeters to give golfers more area to look at from address – and more confidence in the shot they are about to hit.

YouTube Preview Image

To broaden the appeal of the RBZ Stage 2 even further, the equipment maker has released a Tour model of this driver, with even lower and more forward CG and a Matrix 6Q3 shaft stock to produce a more penetrating ball flight. A scientifically designed crown decal is intended to make it easier to align drives properly, while the 50-gram Fujikura RocketFuel shaft that comes stock helps TaylorMade keep this big dog under 300 grams in total weight – to encourage faster swing speeds.

A player will notice that no loft is stamped on the bottom of the cheap golf clubs; instead, the driver can be adjusted for any loft between 8 and 12 degrees. During an 800-player focus group, TaylorMade determined that 80 percent of golfers were using the wrong loft. The R1, the company says, also features up to 120 yards of left-and-right adjustability.

There is also lots of buzz around the new TaylorMade R1 driver, which Dustin Johnson, Brian Gay and John Cook used to win early-season tournaments this year. Adjustability is the big story here, and the R1 gives golfers the ability to make 12 loft-sleeve adjustments and seven face-angle positions. Players can also fiddle with ball flight through use of the two movable shot-shape weights.

All told, the R1 gives them a total of 168 possible tunings, and what seems particularly noteworthy is the utter lack of loft numbers on these clubheads. A player only needs to get one head and then can use the adjustability features to manipulate it from eight to 12 degrees.

Which one should I choose? R1 or RBZ Stage 2?

I am a low handicap golfer and want to get a RBZ Stage 2 driver to instead my previous TaylorMade burner 09 driver, so I went to my local golf shop and try the rbz stage 2 driver, but think it does not performance well. At the same time, the taylormade r1 driver come into my eyes. Tried it and found very nice, recommend to every golfers.

YouTube Preview Image

1 2